Birmingham Milling Machines

Notes on TAIWAN Built Birmingham Mills. These are very fine milling machine's that are not short changed in quality. Their heads are top quality, well suited for daily production. The table movements are smooth and pleasing to the operator. These machine's can hold their own with any major brand.

Model BPS-1649 Turret Knee Mill

    With Step Pulley Head

Made in Taiwan: $5830.00

The 9"x 42" Milling machine has always been an industry standard. The BPS-1642 stacks up nicely against the best machines made.

Features:

  • Certified Meehanite Castings

  • Turcite B on Female Surfaces

  • 9" x 49" Table

  • Easy to Read Dials

  • Dove Tail Ways

  • One Shot Lubrication

  • Hardened and Ground Table

  • Hardened and Ground X and Y Slideways

  • Dual Table Locks

  • Dual Knee Locks

  • 3 HP, 16 Speed Step Pulley Head

  • Class 7 R8 Spindle

  • Chromed Quill

  • Coolant Ready Base

 

The BPS-1649-C, this is the same as the 1649 shown above but with China Base using Taiwan Head. $3995.00
A Top Seller and Great Value
Specifications of BPS -1649
Table Size 9" x 49"
Table load capacity 600 lbs.
Table T-slot size 5/8" x 3"
Longitudinal travel hand only 35 1/2"
Longitudinal travel w/power feed 33"
Cross travel 13 1/4"
Vertical travel 16"
Ram travel 12"
Quill travel 5"
Spindle taper R8
Head swivel RH. LH. 90°/90°
Head tilting f/b 45°/45°
Ram turret swivel 360°
Spindle motor 3 hp 3Ø(2 hp 1 ph, 8 speeds)
Spindle speeds type step pulley
Spindle speeds (rpm) 90-5600(16 speeds)
90-2800(8 speeds)
Net weight 2500 lbs
A x B x C 86" x 68" x 67"
Optional Items:
  • Digital Read Out
  • Power Table Feed
  • Clamp Set
  • Machinist Vise
  • R-8 Collet Set
  • Power Draw Bar
  • Halogen Work Lamp
  • Coolant System

Mill Options Click Here

Model BPV-3949 Turret Knee Mill

 With VARIABLE SPEED HEAD

Made in Taiwan: $6195.00

The same as the machine above with the exception of the Variable Speed Head. Rather than changing pulley positions you simply turn a dial on the side of the head to change RPM. A must for a busy shop, add a power draw bar and you'll be set up just right.

Features:

  • Certified Meehanite Castings

  • Turcite B on Female Surfaces

  • 9" x 49" Table

  • Easy to Read Dials

  • Dove Tail Ways

  • One Shot Lubrication

  • Hardened and Ground Table

  • Hardened and Ground X and Y Slideways

  • Dual Table Locks

  • Dual Knee Locks

  • 3 HP, Variable Speed Head 60-4300

  • R8 Class 7 Spindle

  • Chromed Quill

  • Coolant Ready Base

 

The BPV-3949-C, this is the same as the 3949 shown above but with CHINA Base and Taiwan Head $4180.00

Connected voltage is

220, 3 phase 60 cycles.

We can assist you in locating a phase converter if needed,
Specifications
Table Size 9" x 49"
Table load capacity 600 lbs.
Table T-slot size 5/8" x 3"
Longitudinal travel hand only 35 1/2"
Longitudinal travel w/power feed 33"
Cross travel 13 1/4"
Vertical travel 16"
Ram travel 12"
Quill travel 5"
Spindle taper R8
Head swivel RH.LH 90°/90°
Head tilting f/b 45°/45°
Ram turret swivel 360°
Spindle motor 3 hp 3Ø(3hp, 1Ø)
Spindle speeds type Var-speed
Spindle speeds (rpm) BPV 60-4300 (vari)
BPV-F 65-5000 (EVS)
Net weight 2600 lbs
A x B x C 86" x 69" x 67"
 

Optional Items:

  • Digital Read Out
  • Power Table Feed
  • Clamp Set
  • Machinist Vise
  • R-8 Collet Set
  • Power Draw Bar
  • Halogen Work Lamp
  • Coolant System

Mill Options Click Here

 Model BPV-1054Turret Knee Mill

With VARIABLE SPEED HEAD

Made in Taiwan: $7590.00 with free freight in 48 States

This is our choice for those who need more work space. The 10 x 54 table allows you plenty of room for fixtures, multiple vises etc. The saddle is larger and rides on square ways..

Features:

  • Class 7 Spindle

  • R-8 Spindle

  • Chromed Quill

  • Certified Meehanite Castings

  • Turcite B on Female Surfaces

  • 10" x 54" Table

  • Easy to Read Dials

  • One Shot Lubrication

  • Dove Tail Ways Table and Knee

  • Square Ways on Saddle

  • Hardened and Ground Table

  • Hardened and Ground X and Y Slideways

  • Dual Table Locks

  • Dual Knee Locks

  • Coolant Ready Base

  • 3 HP, Variable Speed Head 60-4300 RPM

The BPV-1054-C, this is the same as the BPV-1054 shown above but made in CHINA $4840.00

Specifications
Table Size 10" x 54"
Table load capacity 800 lbs.
Table T-slot size 5/8" x 3"
Longitudinal travel hand only 38"
Longitudinal travel w/power feed 34 1/4"
Cross travel 18"
Vertical travel 18"
Ram travel 18"
Quill travel 5"
Spindle taper R8
Head swivel RH.LH 90°/90°
Head tilting f/b 45°/45°
Ram turret swivel 360°
Spindle motor 3 hp 3Ø(2 hp 1ph 8 speeds)
Spindle speeds type step pulley
Spindle speeds (rpm) Step Head 90-5600 (16 speeds)
90-2800 (8 speeds)
Variable Speed Head 60-4300
   
Net weight 3500 lbs
A x B x C 89" x 81" x 72

 

  

  Optional Items:

  • Digital Read Out
  • Power Table Feed
  • Clamp Set
  • Machinist Vise
  • R-8 Collet Set
  • Power Draw Bar
  • Halogen Work Lamp
  • Coolant System

Mill Options Click Here

 

 Model BPV-4KV Turret Knee Mill

With VARIABLE SPEED HEAD

Made in Taiwan: $9995.00

Now if you need more ponies and a beefier spindle then this is the machine to consider. 5 HP, and a big 40 taper spindle.

Features:

  • 5 HP (3 phase)

  • Variable Speeds

  • Class 7 spindle bearings

  • Square box ways for Y & Vertical axes

  • Hardened and ground X & Y ways

  • Hardended and ground table and T slots

  • Turcite B on ways for smooth movement

  • Dual saddle locks

  • Dual knee locks

  • Large easy to read chrome satin dials

  • Spindle speeds 60-4300 RPM

  • Spindle taper - ISO# 40

  • Net weight - 3,700 lbs.

 
 
  • Box Y & Vertical axes ways
  • Hardened & ground ways (X & Y)
  • Chromed quill-honed head
  • Drawbar/service wrench
  • Electrical box and control cabinet
  • Built-in coolant system with lower tray on base
  • Hardened & ground table
  • Coolant sump in column
  • Coolant drain in base
  • Front & rear chip guard
  • Double knee locks-ratchet style
  • Chromed turn-in-the hand handles
  • Operation/service manual
  • MEEHANITE CASTINGS

Optional Items:

  • Digital Read Out
  • Power Table Feed
  • Clamp Set
  • Machinist Vise
  • R-8 Collet Set
  • Power Draw Bar
  • Halogen Work Lamp
  • Coolant System

Mill Options Click Here